About Me

Jun Fan (S’97-M’00-SM’06) received his B.S. and M.S. degrees in Electrical Engineering from Tsinghua University, Beijing, China, in 1994 and 1997, respectively. He received his Ph.D. degree in Electrical Engineering from the University of Missouri-Rolla in 2000. From 2000 to 2007, he worked for NCR Corporation, San Diego, CA, as a Consultant Engineer. In July 2007, he joined the Missouri University of Science and Technology and is currently a Professor and Director of the Missouri S&T EMC Laboratory. Dr. Fan also serves as the Director of the National Science Foundation Industry/University Cooperative Research Center for EMC. His research interests include signal integrity and EMI designs in high-speed digital systems, dc power-bus modeling, intra-system EMI and RF interference, PCB noise reduction, differential signaling, and cable/connector designs.

 
Summary of IEEE/EMCS Activities
Committee/Board: Dr. Fan served as the Chair of the TC-9 Computational Electromagnetics Committee from 2006 to 2008. He currently serves as the Chair of the Technical Advisory Committee, and is an associate editor for the IEEE Transactions on EMC and EMC Magazine.
Chapter: Dr. Fan was a Distinguished Lecturer in 2007 and 2008. He is the coordinator of the video DL Program, a service the IEEE EMC chapters.
Conferences: Dr. Fan served as the Technical Paper Chair for the IEEE International Symposium on EMC in 2011, 2012, 2014, and 2015, the Technical Program Chair for the 2015 IEEE Symposium on EMC and Signal Integrity, and the general chair for the 2014 IEEE International Conference on Signal and Power Integrity.

 
Awards: Dr. Fan received a Technical Achievement Award in August 2009, Certificate of Appreciation in 2009, 2011, 2012, 2014, and 2015, and Symposium Best Paper Awards in 2010, 2011, and 2015.

 
Nominee Statement
I have volunteered in various technical committees in the EMC Society over the past two decades. As an academic researcher and also directing a large industry/university cooperative research center, I understand the needs of both the academia and the industry. We live in a technology world that is experiencing unprecedented developments. If I become a board member, I will continue pushing the EMC society to embrace the new technology trends, proactively expand the technical scope to accommodate and foster the formation and development of special interest areas, and stay relevant for the industry to meet the needs for engineering and product development. A key factor for success of the society is the values it provides for the members. We should understand the differences among the different generations and provide opportunities for all especially the younger generations to get involved and play critical roles.